The Eureka E10s is an innovative hybrid appliance engineered for both vacuuming and mopping, ideal for homes with a mix of flooring surfaces such as tiles, hardwood, and carpets. It boasts a 2-in-1 cleaning system that performs vacuuming and mopping simultaneously, along with a bagless self-emptying dock that stores debris for weeks—eliminating the need for frequent manual emptying. Equipped with LiDAR navigation, it intelligently maps your space, optimizes cleaning routes, and efficiently avoids obstacles.
In terms of performance, Eureka reports a suction power of up to 4,000 Pa, which is impressive for its class and allows the E10s to effectively capture dust, hair, and everyday debris. It also includes an auto-lifting mop pad, which raises automatically when the robot moves over carpets or rugs to prevent moisture transfer. The bagless self-emptying dock can store debris for roughly 45–60 days before requiring manual disposal. Through the Eureka mobile app, users can schedule cleanings, create no-go or no-mop zones, and connect the device with Amazon Alexa or Google Assistant for easy voice control.
Despite its strong positioning in the mid-range segment, the Eureka E10s demonstrates certain operational compromises. While suction performance is commendable, its mopping system is primarily designed for maintenance cleaning, lacking the scrubbing force needed for ingrained stains. Reports indicate that the self-emptying dock may occasionally leave residual debris in the bin, necessitating manual clearing, and that LiDAR navigation can encounter challenges in confined or low-clearance areas. Users seeking rotating mop pads or enhanced obstacle detection may prefer higher-tier alternatives, but as a dual-function cleaner for routine maintenance, the E10s remains a solid performer.
Specification
Here are the key specifications for the Eureka E10s Robot Vacuum (also styled “NER E10s”) — a 2-in-1 vacuum + mop combo with a bagless self-emptying station:
Specifications
- Suction Power: approximately 4,000 Pa.
- Runtime (single charge): up to 180 minutes (in ideal/lower power mode).
- Dustbin (on the robot unit): ~ 0.2 L (200 ml) capacity.
- Self-emptying dock capacity: ~ 2 L (or “45-60 days” between manual emptying, depending on usage) of debris collected in the base.
- Filtration: HEPA / sponge filter (manufacturer lists filter type).
- Navigation & sensors: LiDAR navigation (top-mounted LiDAR sensor) + features like mapping, zone/room cleaning, no-mop/no-go zones, auto-mop lift when on carpet.
- Mopping: Mop pad with automatic lift when moving onto carpet (to avoid wetting carpet) and multiple mop intensity levels (“Dry / Low / Standard / High”). The water tank for mopping is onboard (not large) ~200 ml.
- Dimensions & Weight: The robot is ~13.8 in × 13.8 in footprint and about 3.9 in in height. Weight around ~23.6 lb listed by manufacturer.
- Noise: On highest suction mode approx ~67 dB measured in tests.
- Suction Modes: Multiple power levels (Gentle, Quiet, Standard, Turbo) according to TechRadar specs.
Notes / Considerations
- The mopping function is best for routine upkeep rather than deep cleaning, as it uses a modest-sized water tank and a basic mop pad structure.
- The self-emptying dock uses a bagless design, eliminating the need for disposable bags, though the base container still requires manual emptying once it’s full. The manufacturer estimates a 45–60 day capacity, but real-world results may differ depending on use.
- Although the LiDAR-based navigation and mapping perform well for its price range, some reviewers observed that its obstacle avoidance and precision in tight corners lag behind higher-end models.
Key Features
Here are the key features of the Eureka E10s robot vacuum and mop combo:
- Bagless Self-Emptying Base: The E10s includes a self-emptying base station that automatically clears the robot’s dustbin and, importantly, operates without disposable bags. Reviewers praise this as a significant convenience feature, minimizing the need for manual upkeep.
- 2-in-1 Vacuum & Mop System: The E10s performs vacuuming and mopping simultaneously, with the mop pad attached during operation. Users can adjust the mopping intensity through the app, selecting from Dry, Low, Standard, or High settings.
- Auto-Lifting Mop Pad: When the robot senses carpeted areas or transitions from hard flooring, the mop pad automatically lifts to prevent moisture from contacting the carpet. This feature is especially useful for homes with mixed flooring types.
- High Suction (Up to ~4,000 Pa): The E10s delivers up to 4,000 Pa of suction power in turbo mode, an impressive figure for its category that enables effective debris removal from both hard floors and carpets.
- LiDAR Navigation & Mapping: The robot employs LiDAR (laser-based) navigation to scan and map your home, generate multi-level floor plans, set no-go and no-mop zones, and execute methodical cleaning paths.
- Carpet Boost & Multi-Floor Support: When operating on carpeted surfaces, the E10s automatically boosts suction power for deeper cleaning. It also supports multiple saved maps for multi-level homes and allows users to set virtual boundaries through the app.
- App Control + Voice Assistant Integration: The robot can be controlled through a smartphone app, allowing you to set cleaning schedules, modes, and zones. It also offers voice control compatibility with Amazon Alexa and Google Assistant for hands-free operation.
Why These Features Matter
- The self-emptying, bagless base significantly reduces the need for manual maintenance, unlike models that require frequent bin emptying or dust bag replacements.
- The 2-in-1 vacuum and mop system provides greater versatility for homes with both hard floors and carpets, delivering a comprehensive clean in a single pass.
- Automatic mop lifting is a thoughtful design for carpets: This ensures textiles and carpets remain protected, as the robot prevents moisture transfer when transitioning from hard floors to rugs.
- With 4,000 Pa of suction power, it’s well-suited for daily cleaning tasks and can easily handle moderate debris, not just surface dust.
- LiDAR-based navigation ensures more precise coverage, minimizes missed spots, and allows you to define restricted areas to keep the robot away from cluttered zones like toys or cables.
- App and voice control provide added convenience, allowing you to start or schedule cleanings remotely and customize routines based on your home’s layout and needs.
Some Considerations
- Although 4,000 Pa of suction is impressive for its price range, reviewers note it falls short of high-end models in removing deeply embedded debris.
- The mopping feature performs well for routine upkeep and light cleaning, but it’s not intended for deep scrubbing or tough, set-in stains.
- Some users reported that the self-emptying system doesn’t always fully clear the dustbin, meaning occasional manual emptying may still be necessary.
How to use the Eureka 2 in 1 Robotic Vacuum and Mop Combo Vacuum Cleaner
Here’s a simple, step-by-step guide on how to use the Eureka E10s Robot Vacuum and Mop Combo — from setup to daily cleaning and maintenance:
1. Setup and Charging
- Unbox and assemble: Unpack the unit completely, ensuring that all protective films and packaging materials are removed from both the robot and the self-emptying base.
- Position the base station on a level surface close to a power outlet, ensuring at least 1.5 feet of clearance on both sides and 4 feet of open space in front for proper docking.
- Attach the dust container (bagless bin) to the station and connect it in.
- Set the robot on the base — It will start charging automatically once docked. Let it reach a full charge—typically within 4 to 6 hours—before initiating the first cleaning cycle.
2. Connect to the App
- Download the Eureka App (available on iOS and Android).
- Follow the in-app instructions to connect the robot to your Wi-Fi (ensure your phone is on a 2.4 GHz network, as most robots don’t support 5 GHz).
- Once connected, the app will let you:
- View and edit your home map.
- Set cleaning schedules and zones.
- Adjust suction power or water flow level.
- Create no-go and no-mop zones.
- Access firmware updates and cleaning history.
3. Start Cleaning
- Start the initial mapping run without enabling the mop function—this allows the LiDAR system to create an accurate layout of your home.
- Once mapping is complete, you can:
- Select specific rooms or zones to clean.
- Choose “Vacuum only,” “Mop only,” or “Vacuum + Mop” modes.
- The robot automatically raises its mop pad upon detecting carpet, allowing for safe cleaning across mixed flooring types.
- After completing a cleaning cycle, the robot automatically returns to its base, empties the onboard dustbin into the self-emptying station, and begins recharging.
4. Refilling and Maintenance
- For mopping: Use only clean water when filling the tank — do not add detergents, vinegar, or cleaning agents unless explicitly approved by Eureka.
- After cleaning, detach and rinse the mop pad, then let it air-dry.
- Empty the base’s bagless dust container approximately every 45–60 days, depending on how often the robot is used.
- Clean sensors and brushes weekly:
- Wipe LiDAR and cliff sensors gently with a soft, dry cloth.
- Remove hair or debris from the main brush and side brushes.
- Clean or replace the filters regularly according to the manufacturer’s recommendations in the manual.
5. Optional: Voice & Smart Controls
- Link the Eureka App with Alexa or Google Assistant to start or stop cleaning hands-free using voice commands like:
- “Alexa, start cleaning with Eureka E10s.”
- “Hey Google, tell Eureka to return to the dock.”
Tips suitable for the Eureka 2 in 1 Robotic Vacuum and Mop Combo Vacuum Cleaner
Here are some useful tips for getting the best results and longer lifespan from your Eureka E10s Robot Vacuum and Mop Combo:
Setup & Navigation Tips
- Place the base station smartly — Select a flat, open spot with at least 1.5 ft of space on both sides and 4 ft in front to allow the robot to dock smoothly.
- Let it map your home first — Before starting the first full clean, run a mapping-only cycle without the mop attached to generate an accurate floor layout.
- Keep floors tidy — Clear away cords, clothing items, and small objects that could interfere with sensors or wrap around the brush.
- Use proper lighting — LiDAR navigation performs optimally in moderate lighting—avoid pitch-dark rooms or highly reflective surfaces during mapping.
Vacuuming & Mopping Tips
- Vacuum before mopping for best results — This helps stop dirt from spreading once water is used.
- Use clean water only in the water tank — Do not add detergents, vinegar, or bleach unless specifically approved in the manual.
- Adjust mop water flow via the app based on your floor type:
- Low flow for laminate or sealed wood floors.
- Standard flow for tile or vinyl floors.
- Remove the mop pad Use vacuum mode only on carpets to avoid dampness or moisture buildup on rugs.
- Enable “auto-lifting mop” so the pad lifts automatically when crossing carpets.
Maintenance & Care Tips
- Clear out the base station’s dustbin every 45–60 days, or more often if you own pets.
- Clean the main and side brushes once a week to remove hair or debris buildup and keep suction strong.
- Rinse the mop pad and dustbin after every use, then allow them to air dry completely before putting them back.
- Carefully wipe the sensors and LiDAR dome with a soft, dry microfiber cloth to ensure accurate navigation.
- Replace the filters every 2–3 months, or according to the manufacturer’s recommendation, to maintain optimal airflow.
- Use the app to keep the firmware updated, as updates can enhance mapping accuracy and fix bugs.
Usage & Safety Tips
- Avoid storing the robot unplugged for long periods — Leave the robot on its dock to maintain a full battery.
- Do not lift or move the robot mid-cleaning — This may disrupt its sensors and cause it to lose its mapped location.
- Monitor the robot during the initial runs to spot potential problem areas such as high-pile rugs or door thresholds.
- Set “no-go” or “no-mop” zones in the app to protect sensitive areas such as pet bowls, cords, or rugs.
- Run it regularly —Regular, light cleaning sessions work better than infrequent deep cleans.
Cleaning Guide
Here’s a clear, step-by-step guide on how to clean your Eureka E10s Robot Vacuum and Mop Combo — including the robot itself, the mop, and the self-emptying base station:
1. Empty and Clean the Robot Dustbin
Although the E10s features a self-emptying dock, the robot’s dustbin should be cleaned regularly to maintain optimal suction.
Steps:
- Take out the dustbin from the robot, typically located at the back or beneath the top cover.
- Dispose of any remaining dirt and debris into a trash bin.
- Wash the dustbin using warm water.
- Let the dustbin air dry fully before putting it back, as moisture could clog filters or harm electronics.
2. Clean the Self-Emptying Base
The E10s comes with a bagless self-emptying base, which requires manual emptying every 45–60 days depending on usage.
Steps:
- Disconnect the base from power.
- Remove the main dust container from the back or top of the station.
- Dispose of all dirt and dust into a trash bag.
- Clean the container with a dry or lightly damp cloth, avoiding harsh cleaning agents.
- Reinsert the container firmly before reconnecting the base to power.
Tip: Periodically inspect the suction port inside the base and remove any debris with a soft brush or vacuum hose.
3. Clean the Mop Pad and Water Tank
To keep the mopping function efficient and hygienic:
- Detach the mop pad from its bracket after every mopping session.
- Rinse it well under running water using mild soap, avoiding bleach or harsh detergents.
- Allow it to air-dry fully before using it again.
- Drain any leftover water from the tank after every use to prevent mold or unpleasant smells.
- If residue accumulates in the tank, rinse it with warm water, avoiding any chemical cleaners.
4. Clean the Brushes and Wheels
Hair and debris can tangle around the brushes, reducing performance.
Steps:
- Main brush: Press the release tab and detach it. Remove any hair or threads, then wipe with a dry cloth.
- Side brushes: Gently pull out the brushes, clean the bristles, and reinsert them securely.
- Wheels: Clean the brushes and rotate them by hand to make sure they spin smoothly.
Tip: Perform this weekly if your floors have pet hair or long strands of hair.
5. Clean Filters and Sensors
- Filters: Gently tap the filter over a trash bin to dislodge dust. Do not wash unless marked “washable.” Replace the filter every 2–3 months to maintain optimal airflow.
- Sensors & LiDAR dome: Gently clean with a soft, dry microfiber cloth and avoid using wet cloths or sprays.
- Charging contacts: Clean the gold contacts on both the robot and dock with a dry cloth to maintain proper charging.
6. General Maintenance Tips
- Always power off or pause the robot before performing any maintenance.
- Do not immerse the robot or charging station in water.
- Ensure all components are fully dry before putting them back together.
- Inspect regularly to ensure all components—brushes, wheels, and filters—are securely attached.
- Keep the robot in a cool, dry location, avoiding hot or humid areas.
What to avoid when using the Eureka 2 in 1 Robotic Vacuum and Mop Combo Vacuum Cleaner
Here’s a helpful guide on what to avoid when using your Eureka E10s Robot Vacuum and Mop Combo — to keep it running smoothly and extend its lifespan:
1. Avoid Using Harsh or Incompatible Cleaning Agents
- Avoid pouring detergents, bleach, vinegar, or alcohol into the water tank, as they may damage internal components and block the nozzles.
- Use only plain water unless the manufacturer specifically allows a gentle cleaning agent.
- Avoid using oily or soapy water, since it can leave streaks and harm the mop pad.
2. Avoid Wet or Hazardous Environments
- Avoid running the robot in puddles, bathrooms, or outside — it is not water-resistant.
- Do not use on wet carpets or moist floors until mopping mode is turned on.
- Place the charging base away from water, sinks, and direct sunlight.
3. Avoid Interfering During Operation
- Avoid lifting, moving, or turning the robot during cleaning — it can disrupt LiDAR navigation and cause mapping errors.
- Do not cover the sensors with stickers, dirt, or ornaments.
- Keep children and pets away from the robot — playing or riding it may harm the device or create safety hazards.
- Avoid manually moving or dragging the robot; always control it through the app or onboard buttons.
4. Avoid Poor Maintenance Habits
- Do not leave the robot disconnected for long stretches, as this can drain the battery and reduce its lifespan.
- Do not neglect regular cleaning of brushes, filters, and sensors — accumulated dirt can lower suction and disrupt navigation.
- Avoid reinstalling wet parts (dustbin, filter, mop pad), as moisture can harm the robot’s electronics.
- Do not allow the self-emptying bin to become too full — empty it at least every 45–60 days, or more often if you have pets.
5. Avoid Using in Unsuitable Areas
- Avoid placing the robot near loose cords, fringe rugs, or long drapes that might get caught.
- Do not put the base station on uneven or carpeted surfaces — it requires a flat, stable area to dock properly.
- Avoid letting the robot cross thresholds or uneven surfaces higher than 0.8–1 inch.
6. Avoid Ignoring App and Firmware Updates
- Do not ignore firmware prompts in the Eureka App, as updates can fix errors and improve navigation or cleaning efficiency.
- Do not reset or erase maps unless required — doing so will remove custom room layouts and no-go zones.
In conclusion, the Eureka E10s Robot Vacuum and Mop Combo is a smart, powerful, and low-maintenance cleaning solution ideal for busy homes. With its bagless self-emptying base, auto-lifting mop, and 4000 Pa suction, it offers efficient, hands-free cleaning on both hard floors and carpets. While its mopping is best for light maintenance rather than deep cleaning, proper care and regular maintenance will keep it performing at its best. Overall, it’s a reliable, user-friendly choice for effortless everyday floor cleaning.